[Author Prev][Author Next][Thread Prev][Thread Next][Author Index][Thread Index]

Details request-PS pump replacement

>Subject: Details request-PS pump replacement
>My first time doing this, so I'm looking to avoid suprises. Looks easy, I
>procedures from list members, and the Bentley. Five detail questions:
>1) Will there be a release of great pressure when I disconnect one of those
>banjo fitting bolts?


>2) When refilling the pump with fluid, which port do I fill- (front to rear,
>there's  the one to press accum, return line, and pressure line).

Everything you can won't hurt. Use a funnel.

>3) While filling the pump (installed, standing in front of car) spin the
>pulley in which direction to fill it.

Drive direction.

>4) I assume the other lines should not be attached until the pump is full of


>5) To bleed lines, do the lock to lock with engine running, wheels off the

Yes. Can be done on round if you are parked on sand or gravel. Off ground
if pavement.

Easy job - use NEW seal rings, check for leaks afterward. Happy Pentosin!

][Mike Aiello][[

Best Regards,

Mike Arman