[Author Prev][Author Next][Thread Prev][Thread Next][Author Index][Thread Index]

re: Subject: 91 200 TQ Brakes

Greg wrote:  (snip)
<<...Run Carbon fiber pads -- they stay cooler. I use
CarboTech Hawk Blue pads.

According to Dan's Simoes mechanic, there's a brake
modulator/regulator that sets the front/rear brake
bias. He recommends rear brake bias, which helps the
fronts. Mine are dialed back as far as they can go.>>
Do you have a source/price/part number for the pads?  Also, how do you adjust
the rear brake bias higher?  I believe bentley has you adjust it by putting a
spacer (?8mm drill bit) in the spring mount point (on the brake pressure
regulator, right rear), tighten, then remove.  Do you make this space larger,
or smaller?

Chris Miller, Windham NH, c1j1miller@aol.com
'91 200q, UFOs, no/little warp - works good for me