[Author Prev][Author Next][Thread Prev][Thread Next][Author Index][Thread Index]

Re: 4KQ bmw P/N center bearing?

On Sun, 15 Feb 1998, Bruce Bell wrote:

> elongation on only one side.  Be most careful with the U
> joint and don't lose or break any of those needle bearings.
> Seems to me someone posted a source for the U joint a while
> back.

When I rebuilt the driveshaft on my 90q (using BMW part) I replaced the
U-joint with a Borg-Warner PN 114-306.  However, this U-joint does not
have a grease (zerk) fitting on it.  I had ~20-25k miles on the rebuilt
and did not have a problem.  

Good luck!

Brendan Rudack
'98 A4tq
Fenton, Michigan USA