[Author Prev][Author Next][Thread Prev][Thread Next][Author Index][Thread Index]

Re: ISV - clean? replace?

Rob Winchell wrote:

>While looking into a rough idle, I of course checked the ISV. Bentley's
>says it should test at 7.5-8.5 Ohms. I'm getting @ 10 Ohms. Is that a big
>enough difference cause problems? I'm guessing yes (obviously) but
>am in denial. Is there anything I can do short of replacing it?

Maybe that extra couple of ohms is due to contact resistance.  Try
removing it, cleaning it and the terminals, and retesting it.