[Author Prev][Author Next][Thread Prev][Thread Next][Author Index][Thread Index]

Re: Error 2142 from ECU...

> On a single-wire sensor, it also includes the infamous earth returns to the
> inlet manifold and their hidden splice.  Check all the wires identified in the
> ECU wiring as chassis grounds for low resistance to the manifold.

Should also clean the connecting bolt at the manifold, right?

> Some are 10Nm, some 20Nm.
> I use wire wool.

What tool do you use to tighten it properly? Can this be done in the
way as the suggestions for putting in spark plugs without any
torque wrench tools, ie. half turn after plug seat touch block?

> Tsk, tsk.  Call yourself a shade tree mechanic?


"a thousand miles from here, there is another person smiling"
1990 Turbo (200t, MAC13A ECU, 1.4-1.6 bar, FWD auto)
name   : gerard van vught
tel    : +27-21-696 0331 (h) / 082 923 9609 (cell)
url    : http://homepages.acenet.co.za/gerard/
e-mail : gerard@poboxes.com  / han.solo@galaxycorp.com