[Author Prev][Author Next][Thread Prev][Thread Next][Author Index][Thread Index]

Re: fitting remote door locks possible??

From: "Mark L. Chang" <mchang@ece.nwu.edu>
Subject: Re: fitting remote door locks possible??

Dan --

(And Igor)...

enlighten us and tell us which of the three actuators from parts-express
would be good for the job.

On Mon, 23 Mar 1998, Dan Simoes wrote:

> Yeah, Igor has done this many a time.
> You need an actuator in the drivers door, which is then
> triggered by the alarm/keyless entry.  The actuator moves 
> the plunger down, sending vacuum through the stock actuator
> (or switch, better) and that sends the pulse to the pump and
> locks the rest of the system.
> These actuators can be found at www.parts-express.com

I have installed the 330-010 in commercial quantities with zero failure
I'll take it back. On one occasion my technician had screwed one up
literally by driving a "stinger" screw through the motor with his
Makita. :)

Igor Kessel
'89 200TQ -- 18psi (TAP)
'98 A4TQ -- nothing to declare
Philadelphia, PA