[Author Prev][Author Next][Thread Prev][Thread Next][Author Index][Thread Index]
Interference fit? Measurements.
In message <Pine.SOL.3.96.980324185430.19257Cfirstname.lastname@example.org> Sachelle Babbar writes:
> So my kh 2,144 turbo is an interference or non? I sent a letter to the
> list stating that possibly my cam timing may be off by approx 1/6 of a
> turn. If it was interference, would the valves hit at this much? TIA!
In practice, sometimes.
Sorry - that's as good as the information gets. 1/6 of a turn on the crank is
probably not a problem. On the cam (only one turn per two of the crank) I'm
not so sure.
UK Audi [ur-]quattro Owners Club