[Author Prev][Author Next][Thread Prev][Thread Next][Author Index][Thread Index]

RE: 200tqw Eibach Spring Part#s...

After talking with Thompson on the phone I checked the fiche ... while
there is a difference between the shocks and a bump stop in the rear
suspension of the wagon as compared to the sedan ... the fiche shows
that the springs are the same parts on all 5000/200s after sometime in
1986.  The OEM parts should have two brown paint dots on them.  The
Eibach springs should work in the wagon as well as the sedan ...

Steve Buchholz
San Jose, CA (USA)

> ----------
> Just wanted to verify part#s on some (never used) Eibach springs that
> I
> recently purchased for my '89 200tqw. They are a ProKit and the box
> part# was torn off. Here are the part#'s stamped on the springs. 
> Front: 1506.001
> Rear: 1506.002
> I was told by Eibach that these are for the 5000/100/200. I was also
> told by the person that I bought them from that they are for the
> 200tq.
> Eibach said that they don't make springs for a wagon. So are the rear
> spring rates going to be a little different, if these are for just a
> sedan?  They should work with the wagon tho?
> Regards, Thompson-