[Author Prev][Author Next][Thread Prev][Thread Next][Author Index][Thread Index]

Re: wheel spacers

Dave Aukerman wrote:
> I'm getting ready to order a set of 225/60/15's for my 100Q(fenders are
> being rolled), but I'm concerned about clearence for the top of the strut.
> I only need another ~1/8".  Any BTDT as far as increasing the wheel offset
> short of changing wheels?  As always your help is appreciated.
> Dave

Have spacers custom made. Contact Jeff Lewis (jplewis at cats dot ucsc
dot edu) for dimensions. Make sure you have good protrusion of your lug
bolts into the hub with the spacers since longer bolts are _very_ tough
to find. You might be able to get away with 3~4mm spacers and stock
'91 200 tq mit 16" Speedlines