[Author Prev][Author Next][Thread Prev][Thread Next][Author Index][Thread Index]

Re: Coil Over installation

Glen is correct, there isn't all that much space. The idea is to take out
the slack so nothing rattles. this is not a load bearing or structural
issue. With the cars weight on the springs everything is going to stay in
place.  You could probably use an O ring in there ( if there is enough
room) and it would work just fine too.

> Thanks, Bruce.
> How much space is there between the threaded sleeve and the strut
> Are we talking a big gap or just a mm or 2?  My only concern about the 2B
> kit is that it may use the tape to make up a significant gap.  Didn't
> any measurement tools handy; maybe someone who put installed their kit
> could recount this info...