[Author Prev][Author Next][Thread Prev][Thread Next][Author Index][Thread Index]
Re: 4kcsq vents only blow hot
>Dan Simoes wrote...
>Check the heater valve at the firewall, which is where the cable
>coming off your temp lever ends. Odds are it's stuck in the hot
>position. Part should be under $20.
There is a spring clip attaching the control cable to the valve. The clip
acts as an adjustment. If it secures the cable at the wrong spot the valve
will either not open or not close fully. It doesn't have to be open very
far to result in hot air all the time.