[Author Prev][Author Next][Thread Prev][Thread Next][Author Index][Thread Index] Re: Fuel injector coolant fan: Solved
Found one in New York for $75 with warranty at Pete`s 914-896-7930. He has more used Q parts. He ships it today. Tomorrow master and slave project. Thanks ,Martin 86 5KCSTQ 170K MI -----Original Message----- From: Martin Pot <paulnet@ipa.net> To: quattro@coimbra.ans. <quattro@coimbra.ans.net> Date: Tuesday, June 30, 1998 11:42 PM Subject: Fuel injector coolant fan: Solved >Thanks list members, I was advised to find the single wire sensor on the >heat shield near the waste gate. Disconnect the wire and hold to ground and >fan should start turning. It did not, but I did see some sparks coming of >the wire, which told me that the problem was in the fan motor. Pulled the >motor assembly out, which was very easily done by, disconnecting the switch >and unscrewing the two screws, that hold the two straps down. I took the >plastic motor cover of ,and found that one set of carbon brushes was all >twisted and melted in surrounding plastic. Now I am looking for an other >motor ,new or used , may be I could find a similar motor ,that I could fit >the assembly, at Grainger? Thanks, Martin 86 5KCSQ 170K >
|