[Author Prev][Author Next][Thread Prev][Thread Next][Author Index][Thread Index]

Big cable splices...

For those interested in even more permanent repair, any welding supply or
large electrical supply company can hook you up. Welding cable is ultra
flexible and absolutely minimum voltage drop - far better than factory
cabling. If you ever have a set of jumper cables made up from welding cable
you'll sneer at any other kind...
Large cable splice tools are readily available in hand sizes (look like
bolt cutters) and even hydraulics. I was certified to perform reactor
coolant pump cabling hydraulic splices on 2" cable a "few" years back. Any
commercial electrical company would do the crimp for little or nothing.
Takes like 10 seconds. The actual butt and end connectors are .50 to a buck

Yeah, I know - its a family list...

********************************AUDI FAN***********************************
                                   EMCM(SW) Dave Head  
87 5KCStq 237K miles                1.85 or so... bar 
    qcusa #3442           Oviedo, Florida     plate: STLTHTQ