[Author Prev][Author Next][Thread Prev][Thread Next][Author Index][Thread Index]

Re: V8Q Coolant Tank R & R

John Karasaki wrote:

> Used the threaded hollow rod from a bicycle (brake cable adjuster with hole
> to allow the cable to slide through the middle of it).  Threaded this into
> the broken off nipple.  Now this piece had a threaded hollow shaft in it.
> Threaded this into the radiator.  Worked great!

If you check the lighting section at your local hardware store, there will
be some threaded tubing there too. It's used a lot when putting together
different sections of lamps, it allows the electrical cord to pass through.
It might be too big for this specific application, but maybe just
right for some other usage on our cars.

Todd Young              WAM!NET Inc.
tyoung@wamnet.com       6100 West 110th Street
612-886-5051            Bloomington, MN 55438-2664
800-585-1133 ext.5051   http://www.wamnet.com/