[Author Prev][Author Next][Thread Prev][Thread Next][Author Index][Thread Index]

Re: Found a source for 11/16" drag link for pump caps

5244 is the Proto part number for that 11/16" drag link socket, 3/8"
drive. I found a place in town that has them, so I'm going to get one
and a 3/8" hand impact driver.

Wallace White wrote:
> I'm looking for that drag link socket for the caps on the hydraulic
> pump, and I found a Proto 11/16" wide, 0.120" thick socket, 3/8" drive.
> Grainger carries them as part 1AH92, $10.32. (Unfortunately they don't
> stock them at the local stores, though, so they ship from Chicago or
> somewhere.)
> I know several people have mentioned filing down a 3/4" drag link
> socket, so I thought this might be a good alternative. (Proto's 3/4" is
> very nearly the same thickness.) I'm not sure whether I'll wait to
> receive this through Grainger or look elsewhere, but I thought it might
> be useful for others as well.
> - Wallace
>   '87 5kcstq 150k