Re: Rear Wiper Motor - '91 100 Avant (Wagon)

[David Boyd <john@dboyd.demon.co.uk>]

In article <nP2b+DAXU7I2EwVd@dboyd.demon.co.uk>, David Boyd
<john@dboyd.demon.co.uk> writes
>
>If some kind soul could check their Bentley (or vehicle) for the
>securing arrangement for this wiper motor spindle, I would be very
>grateful. It is some time since I removed the motor and I think I may
>have lost a washer.
>
>As far as I can see, a domed rubber moulding shrouds the hole in the
>tailgate glass, and on the inside of the glass there is a large steel
>washer between the motor case surrounding the spindle and the moulding.
>
>But on the outside, where the spindle protrudes, should there be another
>large steel washer or what, between the spindle securing nut and the
>rubber moulding ?
>
>My Haynes manual is no help, and as usual with these things, one assumes
>one will remember but...............
>

Mystery now solved by Listers by direct email.

Many thanks

David

-- 
David Boyd
mailto:david@dboyd.demon.co.uk
Cumbria, UK