[Author Prev][Author Next][Thread Prev][Thread Next][Author Index][Thread Index]

Re: Trans Fluid Questions.

I was under the impression (misguided?) that the oil was not supposed to be
changed.  How would I check to see if the oil in my 87.5 CGT needs
changing?  Hard-shifting, noise, etc?



MT90 is correct - it is a 75w90, GL4 lube.
I'm not sure but I assume you will need 3-4 qts.
Make sure you remove the fill plug before removing the drain
plug.  You will need a 17mm allen wrench or socketed allen
to do this.

I'll be doing our 87.5 CGT soon too - actually I should
order the stuff today...
- --
Dan Simoes                                dans@ans.net
Worldcom Advanced Networks    http://coimbra.ans.net/dans.html
100 Manhattanville Road                 (914) 701-5378 (voice)
Purchase, NY 10577                      (914) 701-5310 (fax)