[Author Prev][Author Next][Thread Prev][Thread Next][Author Index][Thread Index]

Re: G60 Caliper Piston Removal


> How does one remove the pistons from a G60 caliper, with compressed air?
> If only one comes out, how do you remove the second one? Any BTDTs on
> the list would be appreciated. Thanks.

Careful extraction by hand will eventually work, but its a little tough.
Compressed air will work, but BE CAREFUL!!!!! An easy way to break fingers,
even with low pressure/ low volume!
(almost BTDT!)

If one comes out, you can easily block the open port with your hand to get
the other one out.

Hth (but I doubt it!)