[Author Prev][Author Next][Thread Prev][Thread Next][Author Index][Thread Index]

Re: oil leak with t-belt change, thanks

Why did it take three times?  ;-)

At 04:14 PM 11/12/1998 ,  Denise Riley TQO was inspired to say:
>  BTW, we used a Sear's 1/2 inch drive impact wrench socket on a breaker bar
>  with a 126cm pipe to loosen and tighten the crank bolt.  The pipe gave way
>  on the third tightening (don't ask why it took 3 times).  Socket and breaker
>  bars are fine.

	88 90Q "Hannu" - K+N, new vac hoses, still 0.0 bar....
	88 Golf GTi - PRO Rally