[Author Prev][Author Next][Thread Prev][Thread Next][Author Index][Thread Index]
thanks for the great write-up on switches scott.
i was less detailed when i did mine....after removal i drilled two
small 1/16" holes into the switch on each side of the rocker and near the
top. into one hole i sprayed contact cleaner until it came out the other
side. i then shook the filled switch for a minute or so ...then i used
compressed air to blow out the residual cleaner. reinstalled it and it works
great....now has several months of use.
86 5kcdtq, tap chip sjm spring
many cyclops bicycles