[Author Prev][Author Next][Thread Prev][Thread Next][Author Index][Thread Index]

Re: Dialynx headers...

In message <014001be34a3$f1cd4db0$f7b4fea9@JURGHOMENT5> "=?iso-8859-1?Q?J=F6rgen_Karlsson?=" writes:

> Is the dialynx headers cast or tube type?


> Have anyone had their dialynx cracked?

I've never heard of one cracking.  They warp like wet cardboard, but
they don't crack.  Warping pulls the studs out of the block - both the
manifold and block are damaged.  Cracking only affects the manifold.

> Does the studs on the 5K break or do they get pulled out of the head? (I

Out of the ten - usually five are still tight, two will have been pulled
out of the threads and three will have broken.

> assume the studs are only pressed in.)

Screwed.  Repairs involve Helicoils.

> Does anyone want sell me their dialynx headers?

I would not be so cruel.

 Phil Payne
 Phone: 0385 302803   Fax: 01536 723021
 (The contents of this post will _NOT_ appear in the UK Newsletter.)