Re: 17 mm hex bit suggestion

To: quattro@coimbra.ans.net
Subject: Re: 17 mm hex bit suggestion
From: fred smith <smitty@pcrealm.net>
Date: Fri, 01 Jan 1999 16:31:17 -0800
References: <1cd0febd.368d10d8@aol.com>
Reply-To: smitty@pcrealm.net
Sender: owner-quattro@coimbra.ans.net

I am sure others have tried this but I will offer it anyway. If you cut
the threaded portion from a wheel bolt and weld the 17mm hex to a
donor socket of your choice you will have an adequate tool for the task.

Smitty

References:
- 17 mm hex bit suggestion
  - From: LOACESQ@aol.com

Prev by Date: 98 A6Q at auction
Next by Date: Re: 17 mm hex bit suggestion
Prev by thread: Re: 17 mm hex bit suggestion
Next by thread: Re: 17 mm hex bit suggestion
Index(es):
- Date
- Thread