Re: 17 mm hex bit suggestion

[Richard Beels <beels@technologist.com>]

Good ideas all.  Or you could call the Ultimate Garage and get a FACOM 17mm
3/8" socket for $4.

At 01:15 PM 1/1/1999 ,  LOACESQ@aol.com was inspired to say:
> If you need a 17 mm hex bit for the tranny plugs and are having a hard time
> finding one, here's an inexpensive, easily found substitute.   There is a
hex-
> sided plumbing connector sold by most hardware and plumbing stores for less
> than $2.  The 11/16" size is the one you want.  A couple of strokes with a
> file to take half a millimeter off each side brings the coupler to 17 mm.


Cheers,
	Richard
	88 90Q "Hannu" - K+N, new vac hoses, lubed U-Joint, still 0.0 bar....
	88 Golf GTi - PRO Rally