[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: Ignition switch mechanism / 5ktq assembly wanted
In message <firstname.lastname@example.org> Leif Pedersen writes:
> The actual key switch mechanism that engages
> the switch is worn excessively. Does anyone have any experience with this
> assembly? Can this assembly be taken apart and is there a relatively easy
> switch or do I need to replace the whole assembly?
Spares are available (distinguish between key profile AN and AH when
ordering) and the whole thing _can_ be dismantled. The instructions are
not in the factory manuals, but they _are_ in the Haynes manuals - the
procedure involves drilling a whole at a precisely measured place on
the outside of the lock.
Phone: 0385 302803 Fax: 01536 723021
(The contents of this post will _NOT_ appear in the UK Newsletter.)