[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: Max Boost/HP? 87 5kcstq

On Fri, 26 Mar 1999, Lewis, Gary M wrote:

> I used the Bosch 944 plastic unit and was VERY unhappy with it.  The thing
> didn't seem to hold pressure above1.4 bar, or below 1.0 bar.  It had a very
> narrow band of usefullness.  K24 spools much better and holds full boost
> better without it.  Spool ups between shifts are better w/o as well.  I
> suppose I should try the Audi BPV, and get back to the list with results.
> After finals (and the $6,000,000 deal I'm putting together at work).  Look
> for mid April for more comments from me on this.

	I look forward to your opinions on this.  If I remember correctly
is was you and also Chad (from Colorado) that think theirs is hampering
performance.  I dont know which unit he is using.  BUt I know some people
have used SAAB units or the 20v unit on ur-q's with good results.  I dont
have any personal experience with this though but I plan to try it on the
4ktq when I get it done.