[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: 200Q flywheel in 4kQ or CGT

In message <933713F1FB7BD111AC2300A0C98F1AD101A07B14@milxpr06.kla-tencor.com> "Buchholz, Steven" writes:

> AFAIK these pins are for the sensor that gets plugged into the bellhousing
> for diagnosis (VAG 1551?).  I'd recommend that you leave them there unless
> they interfere with something ... they should not affect normal operation of
> the engine ...

Well, as Orin was probably the first to note - the ECU doesn't just
need to know that the engine is turning - it also needs to know it's
going round the right way.

 Phil Payne
 Phone: 0385 302803   Fax: 01536 723021
 (The contents of this post will _NOT_ appear in the UK Newsletter.)