[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
cold start problem - interim report
86 4KCSQ - constant stall at start up until finally holds ignition.
What I've done so far:
Repair fuel line leak caused by corrosion.
Replace Coolant Temp Sensor.
Replace all plugs with Bosch Platinum +4 4 electrode plugs
Replace cap & rotor
Check for vacuum leaks.
Much improved. Car starts on first try but stumbles until warm. This happens
hot or cold when the car has been off for more than 1/2 hour.
Could it be : Leaky injector?
Fuel Pressure accumulator?
Please point me in the right direction.