[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
RE: no blink MC codes
>My 89 200tqw has developed a no-start problem after shutdown/cooling off. I
>have been unable to get the fault codes to "dump". Followed the sequence
>per Scott Mo. but do not get the bulb to blink. Any ideas?
Bad fuel pump relay could be the cause of both. Either replace the relay or
remove it and jumper wire it to start car. If it start with the jumper,
there is the reason for your non code. The board in the FPR gets really
messed up over time.