[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
I have a hard time swallowing that a round piece of rubber with some
holes punched in it costs over $5 much less over $100.
I may try my hand at using the wastegate top as a template and
punching holes in the proper location trick, if mine needs
Would be nice if there was an inexpensive <$20 source for these.
'85 4ksq - keeps on going, and going, and...
'86 5kcstq (rebuilding)
'87 5kcstq Wagon - Still tracing the overboost fuel pump cutout