[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Head Porting

BTW:  Please respond directly as I'm not real active right now on the
list.  To Busy building the 4ktq and stripping the front of the ur-q in
prop for an MC, etc.
	Turbo head has a small crack between Intake and Exhaust valves.
What should I expect to pay to fix it.  Do I need to fix it.  Its a KH
	2)  I'm porting it.  Its going well.  ANy areas from Personal
experience where the Water Jacket is very close and I should be careful.
Head is out so I have full access.  Just polishing everything, not
changing much.
	BTW:  New paint I have found.  POR-15.  Great for paining Engine
Blocks.  Its supposed to hold up well.  Almost as good as Powder Coating,
applies with a brush, not to expensive.  Great for Subframes too.
	Well see how it holds up.

	Todd Phenneger
	1985 4000 quattro / silver / daily driver
	1983 ur-q / black / fixing it up
	1984 4000 quattro / modified/ awaiting Turbo Transplant.
	1987 4000 quattro / Saphire Metallic Blue/ Girlfriend's
	1996 A6q / Volcano / Dads Car
   *****1985 5kt / PARTING OUT!