[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: ur-q wont crank

> If you are worried about appling 12 volts where it doesn't belong, you can
> use a volt meter. Connect the positive lead of the meter to the positive side
> of the solenoid and the negative side to a good ground. Have someone turn the
> key to the start position, and if your switch is good, you will read 12v.

good suggestion

> Next connect the pos side of the meter to the neg side of the solenoid( may
> not be accessible?).

the neg "terminal" is the starter mounting bolts isn't it?

Huw Powell


82 Audi Coupe; 84 4kq; 85 Coupe GT