[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Fw: Et 55 wheels on Type 44

OorQue@aol.com wrote:
> > If the offset is too high, you can use a set of 10 mm spacers to raise
> >  the offset to 45 mm, which is standard..
> It's not the offset but the bolt pattern ... depending upon the width of the
> Porsche wheel, there may or may not be enough room to accomodate a proper
> adapter.  For a heavy car that's driven spiritedly, I would be very careful
> about this...
> JG

Right, the wheel will not be hubcentric with a large adapter and the lug
bolts will not protrude into the hub enough either.