[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: people running A8 et37 wheels on your5000/200T,TQ's...read,please...

In a message dated 8/21/99 6:36:07 PM Eastern Daylight Time, OorQue@aol.com 

<< Frankly, using spacers that slip over longer bolts instead of bolting onto 
 the hub (as Porsche did on the 930) makes me nervous.  However, if you must 
 use such a spacer -- and if all you need is a mere 10mm, then you don't have 
 any choice -- make sure it's hub-centric on both sides so the bolts aren't 
 the only means of locating the wheel.  I believe that H&R's spacers fit this 
 description although I don't recall them listing any thinner than 30mm in 
 D&W catalog.

that's why i didn't want to go with spacers/longer bolts.  i dont mind 
running a different offset wheel on the front, than the back, since i rarely 
rotate my tires, if i do, it's left to right.