[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

VC. Stud Removal

In a message dated 9/7/99 7:22:40 PM Mountain Daylight Time, OorQue writes:

<< Double-nut them ... this means screw two nuts onto the stud, screw them 
tightly together using two wrenches, then use the the bottom nut, which is 
now locked into place, to unscrew the stud.  Of course, this assumes that you 
don't have access to a proper stud remover...

Any tricks to help out the process of removal, so that they don't break?