[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Urq bleedin' brakes

My URQ project is back together and _running_! 
Tonite I attempted to bleed the brakes. Started at the end of the MC (closest 
to the radiator), and got nothing out. Method used was my normally effective 
SO presses and holds pedal while I open and close bleeder nipple. Proceeded 
to the bleeder on the pressure regulator below the MC, which produced a 
steady (no bubbles) stream of brake fluid. Then I noticed that as the pedal 
was depressed, Pentosin was being pushed out the top of the hydraulic 
What in the world is going on here? The Bentley doesn't shed much light here.

Dennis Graber