[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Pulsating Clutch in 200 20V

Most likely a bad throwout bearing, Mike.

Fred Munro
'91 200q  281k km

----- Original Message -----
From: Mike Guidotti <mikeeg@mindspring.com>
To: Mike Guidotti <mikeeg@mindspring.com>; quattro list
Sent: Saturday, September 18, 1999 1:49 AM
Subject: Re: Pulsating Clutch in 200 20V

>  my friend is having this problem with his 1991 200 20v. When you press
> clutch in there is a strong pulsating in the pedal. At first it only did
> this at high speeds and felt fine when it was not moving( just started
> it today) well now it does it at idle with the car not moving. There does
> not seem to be any consistency to it. could this be a hydraulic problem, I
> was thinking maybe the slave cylinder? a few weeks ago he noticed a
> noise maybe the throwout bearing I was thinking that it was related.
> any help or suggestions would be greatly appreciated.
> Thanks,
> Mike Guidotti
> 87 5KTQ