Re: 4KTQ conversion questions

["Lawson, Dave" <dlawson@ball.com>]

>I found similar situation out when swapping the MC engine into the Ur-q.
>The stock Ur-q fuel distributor could not provide enough fuel at anything
above
>7-8psi (the O2 sensor just goes into red).
>It did not "feel" like it was running lean but thanks to that gauge I was
able to
>spot it right away.
>Installing the MC fuel distributor and lines/injectors cured the problem.
>Obviously the computer was set up to run with the corresponding fuel
system.

Interesting... I am running the MC with complete electronics and with the
ur-q fuel system. No lean condition for me, A/F gauge is right in the middle
at 12 psi of boost. But I am running the MC control pressure regulator...
-
Dave Lawson