[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: Rolling cars without axles
At 12:40 AM 11/18/1999 -0500, DGraber460@aol.com wrote:
>After taking the axle shafts out of the CGT, I noticed that the wheels (even
>though bolted tight) would wobble on the bearings. Is it risking pulling the
>pressed in bearings out to roll the car around without the axles to secure
> It will destroy the bearings to roll the car with the axles removed.
Mike Posner. San Diego.