[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: Rolling cars without axles
I have a CGT that was crunched right rear. I had recently replaced _all_ the
front end components. As it's going to the boneyard, I'm stripping everything
I can. It needs to roll for them to take it away, and I wanted the axle
shafts. The concern is that the bearings had less than 3k miles on them, and
I would hate to ruin them for a possible future owner/user. Consensus was
unanimous not to roll it. Glad I noticed the looseness, and asked.