[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: K-Jet Problem

"Alan Kramer" <ackramer@hotmail.com> writes:

>Rotor is positioned so it begins to pass the #1 wire at this point.  

Make sure the notch on the metal "hat" under the rotor is lining up with
the notch on the outer ring of the distributor.  Some Audis are very
finicky about this. BTDT

Aside from this, the symptoms mimic an air leak problem somewhere.  


Get free e-mail you don't need Web access to use --
Or get full, reliable Internet access from Juno Web!
Download your free software today: http://dl.www.juno.com/dynoget/tagh.