[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: turbo oil & water gates.

In a message dated 12/1/99 11:10:00 PM Eastern Standard Time, 
sbabbar@iris.nyit.edu writes:

<< For oiling, stick with what the audi gods gave ya. I doubt that you'll
 even save much over custom made lines by going with "standard" lines. What
 are these standard lines, anyway?

    My original email made it quite clear that I did not desire to alter the 
capacity of the lines, so...
    You obviously have never priced out the stock lines...dealer list for the 
two oil lines alone is about $150 each!  The oil cooler lines are another 
$300.  Or, you could probably do all the lines in Aeroquip hose and reusable 
AN fittings for $100, which also happen to be of superior quality.  I have 
heard of two Ur-Q's burning to the ground because of burst turbo oil lines...