Re: turbo oil & water gates.

[Aleksander Mierzwa <alexaudi@kki.net.pl>]

At 18:18 99-12-03, isham-research.freeserve.co.uk@pop.freeserve.net wrote:

>> The factory oil cooler lines do have standard metric fittings. If Aeroquip
>> is at least half as good as people say, they should be able to fabricate
>> lines with metric fittings.
>
>They're supposedly Parker Hanifin fittings.

Parker makes them and many other manufacturers make them as well. I can't
quote the exact norm these fitting conform to, but they are standard -
you'll find the identical fittings on hydraulic lifts, presses, earthmoving
equipment etc.

--
Aleksander Mierzwa
Warsaw, Poland
87 5KT