[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

was won't idle when cold

Hi all

Many thanks to all those who replied, the cure was a good squirt of WD40 into the ISV, obviously was sticking. So when I next 10 minutes I will pull it and clean it. Kevin's point about the leaky screen into the glovebox and hence the ISV controller turned out to be right, my maps were doing a great job of acting like a sponge so I wasn't really aware of the problem. I got a tube of Polyurethane sealant (Loctite) and sealed all the way round under the screen rubber hopefully this should sort it. I have used this sealant before and rate it highly, it can be used for sealing body panels and all sorts, seems to be better than silicone IMO.