[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
RE: virtual CD programs for W98
After struggling for another 4 or 5 hours,I am asking for help again....
Try again...when I run fakecd - windows explorer doesn't show the new drive.
I have tried booting to DOS but couldn't figure out how to get etka to run
Farstones' Virtual CD 2000 is the one which put the new CD ikon on that
explorer could see. Its properies are 0 bytes used 0 bytes free and trying
to explore it comes up with a message - cannot access drive G: drive not
Without it I open etka but there aren't any
If you could recall and copy your batch file or sequence for
running the virtual program for me I'd appreciate it.
I'm sure there's something I'm missing- hopefully simple.
Iam running W98 SE and am on a AMD K^-2 400 machine(new processor and MB).
89 200 quattro
> > -----Original Message-----
> > From: Marc Swanson [mailto:firstname.lastname@example.org]
> > Sent: November 22, 1999 1:38 PM
> > To: Barfoot, Colin
> > Cc: email@example.com
> > Subject: Re: favorite album
> > > Marc,
> > >
> > > I have successfully downloaded and installed the album - with
> CD option
> > > selected (I got a file open error when trying to install the
> > full program
> > > "English") and can display it ok in 1280x1040 resolution on
> 17" monitor.
> > hmm.. I never tried doing the full install, but I imagine that it still
> > checks the CD for some things. Keep in mind that whenever the
> > program looks
> > for the CD you either have to have burned a copy of the data you
> > donwloaded
> > (should be a perfect mirror of the cd), or fool the filesystem
> > into thinking
> > that a folder on your HD is really a CDROM drive (fakecd I believe
> > accomplishes this).
> > >
> > > Now... how do I use it? Do you have instructions anywhere that I can
> > refer
> > > to? Perhaps I didn't install it correctly?
> > When you start the program, you have a choice between a couple of
> > different
> > model lines such as marque1, marque 2 alone, marque3 , and another
> > option I think.
> > After that, you have to select a model from the screen that pops up (all
> > european model names... eg "favorite marque" 80 = "favorite marque" 4000
in the US). After
> > that, you
> > get a menue that lists part groups that you can select and that
> is mainly
> > how you navigate through the listings.
> > >
> > > I tried clicking on all the buttons and think I need to know
> some basic
> > > information on what to enter in the fields. I tried 44, 5000,
> > 200 for the
> > > model field but got a German error message. Thanks in advance for any
> > help
> > > you can provide.
> > The model designations carry some strange symbols as well as
> > being different
> > from the us model designation. For example, Audi 200 quattro
> is listed as
> > A20Q. BTW, you shouldn't have to select a model in that way.
> > There should
> > be a list of models to choose from.
> > >
> > > Please reply to all to get the reply to my home email as well
> > as this one
> > > (work).
> > >
> > > Thanks in Advance for your assistance
> > Hope this helps a little. Let me know if you need more info.
> > Later
> > -Marc-