Re: G60 brakes on an 88 90q

[Ssgacc@aol.com]

If you are replacing Girling single piston front calipers, either 54 or 60 mm 
I believe, they will bolt right on the existing brackets.  (BTDT x 2)  Wheel 
clearance should not be an issue as you have later vintage 15x6 wheels, yes?  
I also would clean/inspect the guide pins, and replace the little 
boots/grease.  That comes as a kit and does 2 wheels (p/n 443 698 470).  It's 
about $6.  As for the other parts, there are many places to get them, but I 
got mine last setup from Import Parts Specialists in Idaho. (1-800-897-7278)  
I paid $100 ea. for the G60 calipers, $50 ea for the Ate atom groove rotors, 
and $55 for the Axxis(MetalMaster) pads.  I shopped price and this was the 
best I found.  Pretty good service.  I have no connection to these people, 
just cheap prices and I get what I want right to my door.  I have the p/n's 
for these brake parts somewhere, but like I said, it should be a straight 
bolt on for any other Girling brakes.  Also, this is the best street braking 
setup I EVER used.  I'm sure its not the ultimate track type setup, but its 
cheap, gives good braking performance, and lasts a reasonable life.

Good Luck
Jim Accordino