[200q20v] Re: climate control errors 08 and 15
munrof at isys.ca
Sat Aug 5 13:33:21 EDT 2000
The connector is located under the plastic plenum cover. The temp flap
regulating motor has an integral wiring harness about 12" long and it plugs
into a connector on a main harness near the firewall. These codes can also
be caused by a dirty or bad potentiometer on the motor.
----- Original Message -----
From: "Sean Ford" <audi_92_100cs at yahoo.com>
To: "Fred Munro" <munrof at isys.ca>; <hah at srv.net>; <quattro at audifans.com>
Cc: <200q20v at audifans.com>
Sent: Friday, August 04, 2000 9:47 PM
Subject: Re: climate control errors 08 and 15
> --- Fred Munro <munrof at isys.ca> wrote:
> > Hi Henry;
> > Check the connector to the temp flap regulator motor. This was the
> > source of
> > these codes on my '91 200q. Some Stabilant 22A fixed it up.
> where would that be? I just checked and I have the same damned codes!
> 8.7 and 15.1. Amazing.
> Sean Ford
> audi_92_100CS at yahoo.com
> '92 Audi 100CS 5-spd non-q
> '00 Triumph Daytona 955i
> '89 Suzuki Katana 600
> Do You Yahoo!?
> Kick off your party with Yahoo! Invites.
More information about the 200q20v