[200q20v] Speedo fix

Brian.Link at Level3.com Brian.Link at Level3.com
Wed Oct 18 10:51:12 EDT 2000

I just fixed mine,
Take out the Instrument cluster (IC).

Take just about every screw out of it.  Pull the Speedometer up and off.
Look at the little green connectors soldered to the "big" circuit board that
the pins on the speedometer connect to.  Remove the big board by removing a
few hex nuts.  Re-solder the little green connectors.  Others have replaced
the pin to connectors with wire and some type other type of connector
(Chris's home page speedometer fix).
When I took the "big" board out It was clear why my speedometer did not
work, the little green connectors the pins were not soldered down very well.
No problems ever since.

Or just take your car to a Speedometer repair shop and pay $75.

Brian Link
91 200tq
Boulder, CO  

More information about the 200q20v mailing list