[200q20v] oil pressure switches

Peter Petersen pwpetersen at earthlink.net
Wed Aug 22 10:04:14 EDT 2001


I have heard that there are three potential causes for the three beep oil
pressure warning:  the oil pressure switch, the oil pressure sending unit,
or a dirty connector on the back of the instrument cluster.  I replaced the
first two just because they looked like original equipment.  Of course, it
turned out to be the instrument cluster.  One hint, if its the instrument
cluster, sometimes it will beep when you hit a bump.


 -----Original Message-----
From: 200q20v-admin at audifans.com [mailto:200q20v-admin at audifans.com]On
Behalf Of Tracy Knoop
Sent: Wednesday, August 22, 2001 6:25 AM
To: 200q20v at audifans.com
Subject: [200q20v] oil pressure switches

  I've written earlier about oil pressure warning light problems.  The gauge
says a tad under 5 while the light goes on saying I have low oil pressure.
Mr. Wong said it is likely the oil pressure sensor---but I just want to
clear up one more thing.  What do the oil pressure switches do????   Also is
part number 035 919 561 the correct number for the 200 TQ oil pressure gauge
sensor???  Thanks---

  Tracy M. Knoop Novak
  422 Greenway Avenue
  Bozeman, Montana  59718-1824
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://www.audifans.com/pipermail/200q20v/attachments/20010822/a2c2e09e/attachment.htm

More information about the 200q20v mailing list