[200q20v] re: stupid brake question...

C1J1Miller at aol.com C1J1Miller at aol.com
Sat Aug 25 12:19:41 EDT 2001

John:  the sensors are a separate part from the pads; they slide right out 
towards the face of the pad (and then through the caliper no problems).  if 
they haven't worn through (and activated the "pad warning"), you can reuse 

[200q20v] Ok, stupid brake question... 

Chaplen, John John.Chaplen at us.wmmercer.com 
Fri, 24 Aug 2001 15:30:49 -0500 

     Previous message: [200q20v] MA Emission test 
     Next message: [200q20v] MA Emission test 
     Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] 

I have an extra set of pads for the UFO's, does the wear sensor remove from
the pad itself?, I ask because it does not seem that the plug at the end of
the wire fits through the opening on the caliper?

I just don't want to break the sensor if it not suppose to come off.

Thanks to all in advance,


(sorry about the "extra" message at the end my company places on all out
going e-mails)

More information about the 200q20v mailing list