[200q20v] Tranny Replacement
MikeMilr at blackfoot.net
Tue Feb 20 09:03:43 EST 2001
Before I replaced mine, I had over an inch of movement.
----- Original Message -----
From: Phil Rose
To: Mike Miller ; 200q20v maillist at audifans
Sent: Tuesday, February 20, 2001 8:00 AM
Subject: Re: [200q20v] Tranny Replacement
At 9:14 PM -0700 2/19/01, Mike Miller wrote:
>The way I checked my tranny mounts is as follows:
>Lift throttle in any gear - if the shifter moves, the rear mounts
>are likely bad. After I replaced mine, the was NO movement of the
>shofter on lifting the throttle.
I have tried to check for shifter movement. While I thought I could
_feel_ some slight movement, it's hard to say it's enough to
actually be seen. Is _any_ amount of movement "too much" (i.e.,
enough to warrant mount replacement)? I'll check again--I suppose
there could be as much as 1/8" movement under some conditions. That
doesn't seem very bad, to me, but...?
mailto:pjrose at frontiernet.net
-------------- next part --------------
An HTML attachment was scrubbed...
More information about the 200q20v